Chih TAI Y&S CO.,LTD

   No.20, Lane 70, Sec.5, Yang-Hai Road., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.Box: 107 Lukang         E-mail: chihtai@ms16.hinet.net


Contact Us


Home

Air Tools
Auto Tools
Socket Sets
Wrench
Fluid/Oil extractor
Motor Cycle Tools
Pliers
Torque Wrench
Torque Screwdriver
Cordless Tools
Ratchet Handle

New Products

¡@

¡@

          NEW PRODUCTS - AUTO TOOLS
          More New Products   Page 1  |  Page 2  |  Page 3 Page 4  |  Page 5  |  Page 6

¡@

CH040946

PISTON C-TYPE INSTALL TOOL

¡@

¡@

CH040947

VALVE SPINDLE TOOL

¡@

¡@

CH040948

CRANK BEARING & GEAR PULLER / INSTALL TOOL

¡@

¡@

CH040950

CONDUIT OILER

¡@


CH091501-B
HOSE REMOVER PLIERS (MOTORCYCLE)

¡·FOR EASY REMOVER OF £r4~£r10MM FUEL & VACNUM HOSE.
¡·THE PLIERS HAVE TWO DIFFERENT COLOR OF JAW BLACK & SILVER COLOR, BLACK COLOR JAW FOR TUBE END & SILVER JAW FOR HOSE END.
¡·ON THE BLACK JAW HAVE A ¡§DIGS¡¨ CAN INTO SMALL TUBE & HOSE.
¡@

 


CH091535
TIMING TOOL

¡· FOR RENAULT CLIO ¢xMEGANE¢x LAGUNA KANGOO 1.9 DTI ENGINES.
¡@

¡@

CH091536 CLIP REMOVER TOOL

¡·THIS TOOL DESIGN TO USE FOR SELF-LOCKING COWLING CLIPS.


CH091537
SPANNER WRENCH FOR TIMING BELT

¡·THIS WRENCH CAN USE FOR THE ADJUSTMENT OF THE TIMING
BELT
¡·APPLICATION: 2004-2005 VW GOLF, JETTA PUMPE DUSE 2002-
2005 AUDI 3.0 V6 ENGINES.
¡@


CH091538
4" OFFSET HARMONIC DAMPER PULLEY HOLDING TOOL(HONDA & ACURA)

¡· THIS UNIQUE TOOL HAS BEEN DEVELOPED TO AID IN THE REMOVAL AND INSTALLATION OF THE CRANK BOLT ON MOST HONDA AND ACURA ENGINES.
¡·IT HAS BEEN RE-ENGINEERED TO WORK ON 2004 AND LATER NEW STYLE SUV'S WITH A 50MM DAMPER PULLEY AS WELL AS ALL PREVIOUS MODELS SERVICED.
¡· IN OPERATION WITH THE USE OF A 1/2" BREAKER BAR OR RATCHET THIS TOOL HOLDS THE HARMONIC DAMPER PULLEY FROM ROTATING WHEN REMOVING AND SETTING THE FINAL TORQUE SPECIFICATION ON THE PULLEY BOLT.
¡·THERE IS A HOLE IN THE CENTER OF THE TOOL TO ALLOW THE USE OF A SOCKET AND EXTENSION TO BREAK LOOSE OR TIGHTEN THE PULLEY BOLT.

APPLICATION:
FOR HONDA ACCORD 2.2L 4 CYLINDER 90-97, 2.7L V-6 96-97, 2.3L 4 CYLINDER 98-02, 2.4L 4 CYLINDER 03 & LATER, 3.0L V-6 98 & LATER
CIVIC 1.6L 4 CYLINDER 92-00, 1.7L 4 CYLINDER 01 & LATER, 2.0L 4 CYLINDER 03 & LATER
CRV 2.0L 4 CYLINDER 97-01, 2.4L 4 CYLINDER 02 & LATER
DEL SOL 1.6L 4 CYLINDER 93-97
INSIGHT 1.0L 3 CYLINDER 00 & LATER
ODYSEY 2.2L 4 CYLINDER 95-97, 2.3L 4 CYLINDER 98, 3.5L V-6 99 & LATER
PILOT 3.5L V-6 03 & LATER
PRELUDE 2.2L 4 CYLINDER 92-01, 2.3L 4 CYLINDER 92-96
S2000 2.0L 4 CYLINDER 00-03, 2.2L 4 CYLINDER 04 & LATER
ELEMENT 2.4L 4 CYLINDER 03 & LATER
*RIDGELINE 3.5L V-6 06 & LATER
FOR ACURA
CL 2.2L 4 CYLINDER 97, 3.0L V-6 97-99, 2.3L 4 CYLINDER 98-99, 3.2L V-6 00-03 INTEGRA 1.6L 4 CYLINDER 90-92, 1.7L 4 CYINDER 92-93, 1.8L 4 CYLINDER 93-01
LEGEND 3.2L V-6 91-95
MDX 3.5L V-6 01 & LATER
RL 3.5L V-6 96 & LATER
RSX 2.0L 4 CYLINDER 02 & LATER
TL 3.2L V-6 95 & LATER
*TSX 2.4L 4 CYLINDER 04 & LATER
*RDX 2.3L 4 CYL TURBO 06 & LATER
¡@

      


CH091539
WATER PUMP HOLDING TOOL FOR GM

¡·SIMPLY REMOVE ACCESS PLATE FROM FRONT COVER AND INSTALL THE TOOL TO HOLDING TIMING CHAIN IN PLACE
¡·USE FOR 2002-2008 GM 2.2L & 2.4L ECOTECH ENGINE IN CHEVROLET OLDSMOBILE, PONTIAC AND SATURN PLATFORMS
¡·APPLICATION GM ECO TECH
2.2 ENGINE CODE F

2002-2005 CHEV CAVALIER
2005-2008 CHEV COBALT
2003-2008 CHEV MALIBU
2002-2004 OLDS ALERO
2002-2005 PONTIAC SUNFIRE
2007-2008 PONTIAC G5
2002-2005 PONTIAC GRAND AM
2002-2006 SATURN VUE
2003-2007 SATURN LON
2000-2005 SATURN L SERIES
2.4 ENGINE CODE B
2005-2008 CHEV COBALT
2005-2007 CHEV HHR
2004-2008 CHEV MALIBU
2006-2008 PONTIAC G6
2006-2007 PONTIAC PURSUIT
2006-2008 PONTIAC SOLSTICE
2007-2008 SATURN AURA
2006-2007 SATURN LON
2007-2008 SATURN SKY
¡@

¡@




CH091540
WINDSCREEN WIPER ARM REMOVAL TOOL


¡·THE SPECIAL DESIGN OFFERS EASY ACCESS IN CONFINED SPACES AND ELIMINATES THE RISK OF DAMAGE TO THE WIPER ARMS.
¡·A SIMPLE, EFFECTIVE TOOL ALLOWING EASY REMOVAL THE STUBBORN WIPER ARMS.
¡·SIZE: 16MM*46MM
¡@

CH091540-A
WINDSCREEN WIPER ARM REMOVAL TOOL


¡·THE SPECIAL DESIGN OFFERS EASY ACCESS IN CONFINED SPACES AND ELIMINATES THE RISK OF DAMAGE TO THE WIPER ARMS.
¡·A SIMPLE, EFFECTIVE TOOL ALLOWING EASY REMOVAL THE STUBBORN WIPER ARMS.
¡·SIZE: 26MM*42MM

CH091541
AIRBAG RELEASE TOOL GM


¡·TOOL DISGEN FOR FAST RELEASE OF THE RETENTION SPRINGS FOR REMOVAL OF THE STEERING WHEEL AIRBAG MODULE ON GM MODELS.
¡· VEHICLES INCLUDE BUICK, CADILLAC, CHEVROLET, PONTIAC, SOME TRUCKS AND MINIVANS.

CH091542
SUBFRAME BUSH REMOVER(FORD MONDEO)


¡·A SPECIALLY DESIGNED TOOL FOR REMOVING AND INSTALLING THE REAR SUBFRAME ON A FORD MONDEO.

¡@

CH091543
CRANKSHAFT LOCKING TOOL


¡·FOR 2.0 LITRE VOLKSWAGEN AUDI ENGINES-NON BORED OUT ENGINES.

CH091544
CADILLAC/AURORA WATER PUMP R&R SOCKET


¡·THIS UNIQUE TOOL HAS BEEN DEVELOPED TO REMOVE AND INSTALL THE WATER PUMP ON CADILLAC NORTHSTAR 4.6 LITER V-8 ENGINES FROM 1993 AND LATER ALSO OLDSMOBILE AURORA 4.0 LITER V-8 ENGINES 1995 AND LATER.
¡·MANY OF THE SOCKETS PRESENTLY AVAILABLE ON THE MARKET ARE FRAGILE IN NATURE DUE TO THE CONFINED AREA AROUND THE WATER PUMP IMPELLER AND CAN NOT USE FOR IMPACT WRENCH.
¡@


CH091583
HOSE CLIP PLIERS


¡·FOR REMOVAL AND REPLACEMENT OF FUEL-LINES, OIL-LINES, RADIATORS HOSES AND HEATER HOSES FITTED WITH SPACE-SAVING, RE-USABLE, SELF-CLAMPING SPRING HOSE CLIPS. ¡·SPECIAL DESIGN ENSURES THAT THE COMPRESSED CLIPS ARE SAFELY AND SECURELY RETAINED. ¡·FOR ALFA ROMEO, CITROEN, FIAT, FORD, HYUNDAI, LANCIA, MERCEDES, OPEL/VAUXHALL, PEUGEOT, PORSCHE, RENAULT, SEAT, SKODA, TOYOTA, VOLVO, ETC. ESPECIALLY FOR THE NEW CLIPS ON FUEL-LINES ON VW-AUDI.                                                                              
¡@

CH091584
SPARK PLUG SOCKET


¡· USE FOR MOST SPARK PLUGS IN MODREN VEHICLES.
¡· 14MM BI-HEX 3/8¡¨DR. 92MM.
¡@

CH091585
SPARK PLUG SOCKET


¡·USE FOR MOST SPARK PLUGS IN MANY VEHICLES.
¡· 152MM LONG SOCKET DESIGNED FOR DEEP SEATED SPARK PLUGS.
¡· 14MM BI-HEX 3/8¡¨DR. 152MM.
¡@


CH091586
2PCS RUBBER RING HOOK TOOL SET


¡·SPECIAL DESIGNED TO PULL THE RUBBER RING WHICH CONNECTED WITH EXHAUST TUBE.
¡· 2 SPECIAL ANGLE HOOK ATTACHED.

CH091587
FORD TIMING TOOL SET


Click to view data chart

¡@

CH091563
CIRCLIP TOOL WITH PED SET


¡· USE FOR INTERNAL & EXTERNAL APPLICATIONS.
¡· SUPPLIED WITH 4 PAIRS OF INTERCHANGEABLE TIPS.
¡·T-BAR HANDLE WITH SCREW ACTION FOR PRECISE CONTROL.

¡@


CH091545
ADJUSTABLE STYLE HOSE REMOVER


¡· THIS TOOL SPECIFICALLY DESIGNED FOR REMOVING HOSES, QUICK AND EASILY LOOSENS AND REMOVES HOSES WITH A SIMPLE FORWARD AND BACKWARD MOTION.
¡·WITHOUT NEEDING SCREWDRIVERS AND MULTI-GRIP PLIERS, NO MORE TORN HOSES, NO MORE DAMAGE TO PLASTIC COUPLINGS.
¡· TOOL CONSISTING OF A BODY AND MOVING JAW THAT ADJUSTS TO FIT HOSE DIAMETER BETWEEN Ø48 TO Ø115MM


¡@

CH091545-A
ADJUSTABLE STYLE HOSE REMOVER


¡·THIS TOOL SPECIFICALLY DESIGNED FOR REMOVING HOSES, QUICK AND EASILY LOOSENS AND REMOVES HOSES WITH A SIMPLE FORWARD AND BACKWARD MOTION.
¡· WITHOUT NEEDING SCREWDRIVERS AND MULTI-GRIP PLIERS, NO MORE TORN HOSES, NO MORE DAMAGE TO PLASTIC COUPLINGS.
¡·TOOL CONSISTING OF A BODY AND MOVING JAW THAT ADJUSTS TO FIT HOSE DIAMETER BETWEEN Ø24 TO Ø53MM.


¡@

CH091546
WATER SENSOR SOCKET


¡·GMC 6.6L DURAMAX DIESEL ENGINE APPLICATION INCLUDING:
2001 TO PRESENT CHEVY/GMC PICK UPS
2003 TO PRESENT CHEVY/GMC MEDIUM DUTY TRUCKS
¡·REMOVE OR INSTALL WATER SENSOR ON FUEL FILTER FOR GM 6.6L DURAMAX DIESEL ENGINES.

CH091547
SPARK PLUG CHASER


¡· NARROW PROFILE AND LONG LENGTH ALLOWS ACCESS TO SPARK PLUG HOLES IN CONFINED SPACES.
¡· FITS SPARK PLUG HOLES WITH LIMITED ACCESS
¡· USE WITH A 3/8¡¨ RATCHET OR EXTENSION
SIZE: M14*1.25
¡@

CH091548
TIMING LOCKING TOOL


¡·FOR 2.0 LITRE VOLKSWAGEN AUDI ENGINES-NON BORED OUT ENGINES.


CH091549
DIESEL INJECTION PUMP PULLER (BMW)


¡· THIS TOOL IS SPECIFICALLY DESIGNED FOR HOLDING THE SPROCKET/CHAIN IN PLACE WHEN DISASSEMBLING THE VP44 INJECTION PUMP AND HIGH PRESSURE PUMP.
¡·COMMON RAIL FITTED TO BMW ENGINES:
318D/COMPACT(E46)
320D/TD COMPACT(46)
330D(E46)
525D(E39)
525D(E60/E61)
530D(E39)
530D(E60/E61)
535D(E60/E61)
730D(E38)
X5 3.0D(E53)
¡@

CH091550
STEERING WHEEL LEVEL


¡·THE STEERING WHEEL LEVEL IS A STURDY AND SIMPLE TOOL USED TO ASSURE A LEVEL STEERING WHEEL DURING A FRONT-END ALIGNMENT PROCEDURE.
¡· THE TOOL IS EASILY ATTACHED TO THE STEERING WHEEL AT THE BEGINNING OF THE ALIGNMENT PROCEDURE.
¡· IT IS SPRING-LOADED FOR AUTOMATIC CENTERING AND SELF-RETAINING.


¡@


CH091551
VW, AUDI BELT TENSION ADJUSTER TOOL


¡·SPECIAL ANGLE DESIGNED FOR ADJUSTING THE BELT TENSION ON THE FREE ROLLER.
¡· APPLICABLE: VW. AUDI.
¡· SIZE: 195M/M*36M/M
£X20.5M/M


¡@

CH091552
2PCS RUBBER RING HOOK TOOL SET


¡·SPECIAL DESIGNED TO PULL THE RUBBER RING WHICH CONNECTED WITH EXHAUST TUBE.
¡· 2 SPECIAL ANGLE HOOK ATTACHED.


¡@

CH091553
SEAL PULLER


¡·DOSIGNED TO REMOVE OIL AND GREASE SEALS WHEN SERVICING CARS, SUVS AND LIGHT TRUCKS WITHOUT DAMAGING THE HOUSING OR BEARING.
¡· HOOK TIPS IN TWO SIZES AND PROFESSIONAL HANDLE DESIGN ALLOWS REMOVAL OF HARD-TO-GET-AT SEALS BY GETTING UNDOR THEM.
¡@

CH091554
DIESEL INJECTION PUMP PULLER(FOR 2.5TDS ENGINES)


¡·FOR BMW/LAND ROVER/VAUXHALL/OPEL.
¡@

CH091555
UNIVERSAL CAMSHAFT SPROCKET PULLER


¡· HOLD THE SPROCKET AND UNDO THE RETAINING BOLT OR NUT AND REMOVE.
¡· THIS TOOL ENABLES THE REMOVAL OF THE CAMSHAFT SPROCKET ON A WIDE RANGE OF VEHICLES.
¡· SUITABLE: 45MM - 70MM.


¡@

CH091556-A
SPRING COMPRESSOR KIT


¡·FOR USE WITH MACPHERSON STRUTS IN WHICH SPRING PRESSURE DOES NOT EXCEED 8 000 N.
¡·THE SPINDLES ARE EQUIPPED WITH CONTRA-ROTATING THREADS WHICH ELIMINATE THE RISK OF SLIPPING ROUND THE SPRING.
¡·COMPRESSION LENGTH: ¡K65-320MM

¡@


CH091557
VACUUM HOSE IDENTIFIERS


¡·THE IDENTIFIERS ARE COMMONLY USED WHEN
TUNING THE ENGINE OR WORKING ON THE CARBURETOR.
¡·IDENTIFIERS CAN ALSO BE USED TO PLUG FUEL LINES
WHILE CHANGING.
¡·CONTENTS: 12PC-1/8" 18PC-3/16-1/4" 12PC-5/16"-3/8"
6PC-6"1/2"
¡@

CH091558
TRANSMISSION AXLE HOLDER WRENCH


¡·THIS TOOL USE FOR 2005 & LATER
LAND ROVER WITH V-8 ENGINES.
    
¡@

CH091559-BS
9PCS BOLE EXTRACTOR SET


¡·USE FOR DAMAGE BOLT REMOVER.
¡·DO NOT USE WITH AIR TOOLS.
¡·SIZE: 3/8" DR. 1/4"-5/16"-3/8"-7/16"-1/2"-9/16"
-5/8"-11/16"-3/4".


CH091560-A
ENGINE TIMING TOOLS ¡V VW & AUDI


¡·THIS NEW KIT OF TWELVE TOOLS IS REQUIRED
FOR PETROL & DIESEL ENGINE SERVICE.
¡·INCLUDING TIMING BELT REPLACEMENT ON RECENT
MODELS AND ALSO OLDER 1.9D MODELS FROM 1976.
¡· MODELS: AUDI A4, A6, A8, A11 YOAD (97-04),
VW PASSAT (98-04).
¡@

CH091561
VW, AUDI BELT TENSION ADJUSTER TOOL


¡· SPECIAL ANGLE DESIGNED FOR ADJUSTING THE
BELT TENSION ON THE FREE ROLLER.
¡·APPLICABLE: VW. AUDI.
¡·SIZE: 185M/M*20M/M £X20.5M/M

CH091562
TIMING TOOL KIT (FOR GM 1.3 CDTI DIESEL ENGINE)


¡· THIS SET USE FOR GM 1.3 CDTI DIESEL ENGINE.
¡· THE KIT INCLUDE FLYWHEEL LOCKING PIN,
CAMSHAFT SETTING TOOLS, TENSIONER LOCKING PIN.

¡@

CH091564
ENGINE TIMING TOOL SET-CITROEN & PEUGEOT

¡· THIS COMPREHENSIVE SET TOOLS ENABLE THE
CORRECT ENGINE TIMING TO BE MADE WHEN REPLACING
THE TIMING BELT.
¡· SUITABLE FOR USE ON THE MOST RECENT CARS
WITH EITHER HPI (RETROL) OR HDI (DIESEL) ENGINES.


¡@

CH091565
SETTING/LOCKING TOOL KIT
(FOR VAG V6 TDI PETROL ENGINE)


¡·A DEDICATED SET OF SETTING/ LOCKING, SUPPORT AND
TENSIONER ADJUSTING TOOLS FOR VW 2.5 V6 DIESEL ENGINES.
¡@

CH091566
TIMING SETTING TOOL KIT


¡· FOR VW, AUDI, SEAT, SKODA, CITROEN,
PEUGEOT.
¡· APPLICATION:
PEUGEOT 106, 205, 206, 306, 307, 309, 405, 406, 407,
605, 806, 807, EXPERT, PARTNER, BOXER (AB 1986), 406 COUPE, 607.
CITOREN AX, ZX, XM, VISA, XSARA, XANTIA, DISPATCH ,
SYNERGIE / EVASION, BERLINGO, DISPATCH, JUMPY, C 2, C 3, C 5,
RELAY / JUMPER. AUDI 80, A2, A3, A4, A6, CABRIOLET (1995 BIS 2000).
SEAT IBIZA, CORDOBA, LEON, TOLEDO, INCA, AROSA,
ALHAMBRA, ALTEA.SKODA FELICIA, OCTAVIA (1993 BIS 2005), FABIA.
VW LUPO, POLO, CADDY, GOLF, BORA, NEW BEETLE,
PASSAT, SHARAN, TOURAN, TRANSPORTER, 1,7 1,9 D / TD / SDI/ TDI.
¡@

CH091567
ENGINE TIMING TOOL SET - FORD & MAZDA


¡·THIS COMPREHENSIVE SET OF TOOLS ENABLES THE CORRECT
ENGINE TIMING TO BE MADE WHEN REPLACING THE TIMING BELT.
¡·APPLICABLE: FORD & MAZDA
¡@

¡@

CH091568
FORD TIMING LOCKING TOOL KIT

¡·CAN USE FOR FORD FIESTA, ESCORT, ORION, COURIER,
FOCUS, FOCUS C-MAX, MONDEO (1988-2003), FUSION,
TRANSIT 1,8 D / TD / TDCI / TDDI 2,0 / 2,4 TDCI / TDDI / 1,4 /
1,6 TDCI.
¡@

¡@

CH091569
VAUXHALL TIMING TOOL KIT


¡·THIS SET CAN USE FOR CLIO, MEGANE, SCENIC LAGUNA, ESPACE,
KANGOO TRAFIC & MASTER (99-04) ENGINE: 1.5, 1.9, 2.2 &
2.5 DCI.

¡@


CH091570
DIESEL FUEL PUMP TIMING SET

¡·THIS PRECISION MEASURING INSTRUMENT IS DESIGNED FOR
RESETTING THE TIMING POSTION ON DIESEL ENGINES WITH THE
FOLLOWING FUEL PUMPS BOSCH/EP/VE ROTORY,KIKKI, NIPPON,
DENSO, CAV ROTODIESEL, TOP ENTRY THESE FUEL PUMPS WILL
BE FOUND ON THE FOLLOWING VEHICLES WITH DIESEL ENGINES.
¡@


CH091571
TIMING TOOL KIT (RENAULT)


¡· THIS COMPREHENSIVE SET OF TOOLS ENABLES THE CORRECT
ENGINE TIMING TO BE HELD WHEN SERVICING RENAULT ENGINES.
¡·APPLICATION:


CH091572
BMW CAMSHAFT ALGNMENT TOOL


¡·INCLUDES FOR SETTING CAMSHAFT TIMING.
¡·APPLICABLE: BMW ENGINE MODELS M40 & M70.

CH091573
ENGINE TIMING TOOL SET - RENAULT


¡· THIS NEW CAMSHAFT PULLEY SETTING TOOL HOLDS TWO
PULLEYS IN PLACE WHILE CHANGING THE CAM BELT AND CORRECT
ENGINE TIMING TO BE PERFORMED WHEN CHANGING THE TIMING BELT.
¡· APPLICABLE: RENAULT 16V & K4J, K4M & F4P, F4R.
¡@

CH091574
VW/AUDI ENGINE TIMING SETTING SET W/4 GROOVES AND ALU FINISH


¡·THIS NEW KIT OF TWELVE TOOLS IS REQUIRED FOR PETROL
AND DIESEL ENGINE SERVICE INCLUDING TIMING BELT REPLACEMENT
ON RECENT MODELS AND ALSO OLDER 1.9D MODELS FPOM 1976.
¡·APPLICATION:
AUDI:A4, A6, A8, A11YOAD(97-04)
ENGINES CODES: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH, BFC
¡@

CH091574-A
VW | AUDI ENGINE TIMING SETTING SET


¡·THIS NEW KIT OF TWELVE TOOLS IS REQUIRED FOR PETROL AND
DIESEL ENGINE SERVICE INCLUDING TIMING BELT REPLACEMENT ON
RECENT MODELS AND ALSO OLDER 1.9D MODELS FPOM 1976.
¡·APPLICATION:
AUDI:A4, A6, A8, A11YOAD(97-04)
VW: PASSAT: (98-04)
ENGINES CODES: AFB, AKE, AKN AYM, BAU, BCZ, BDG, BDH, BFC
¡@


CH091575
VW, AUDI BELT PULLEY HOLDER


¡·SPECIAL DESIGN TO HOLD THE BELT PULLEY ON VW, AUDI.
¡·APPLICABLE¡GVW¡G LUPO, POLO/CLASSIC, GOLF,
BORA & CADDY.AUDI¡GA2
¡@

CH091576
VW BELT PULLEY HOLDER


¡·SPECIAL DESIGN TO HOLD THE BELT PULLEY ON VW.
¡·APPLICABLE¡GVW¡G LUPO, POLO/CLASSIC, BEETLE,
GOLF, BORA & CADDY.
SEAT¡G IBIZA/CORDOBA

¡@



CH091577
ENGINE TIMING TENSIONER KIT


¡· THIS SET CAN USE FOR ALFA ROMEO, FIAT, CITROEN,
PEUGEOT, RENAULT, VOLKSWAGEN.
¡·A COMPRENHENSIVE RANGE OF TENSION LEVER AND
WRENCHES REQUIRED FOR CHANGING THE CAM BELT ON
MOST POPULAR PETROL AND DIESEL ENGINES.


CH091578-12
BRACKET FOR CHAIN ADJUSTER


¡· USED TO RETAIN CAMSHAFT CHAIN ADJUSTER
¡· APPLICABLE: VW & AUDI 4, 6 (2.7L & 2.8L) &
8 CYLINDER ENGINES CONTAINING 5 VALVES PER CYLINDER

¡@


CH091579
TIMING LOCKING TOOLS FOR FORD


¡·THIS FIVE PIECE SET IS ESSENTIAL FOR REPLACING
THE CAM BELT ON FORD FOCUS/CMAX 1.6 TI-VCT WITH
ENGINE CODE HXDA (2003-2007) PLUS 2.0 TDCI WITH
ENGINE CODES G6DA G6DB G6DC 2003-2007.
¡·ALSO REQUIRED FLYWHEEL LOCKING TOOL AND ADAPTORS.

¡@


CH091580
TIMING LOCKING TOOLS


¡· CAN USE FOR RENAULT LAGUNA 2.0 IDE (2001-2005)
F5R ENGINE.
¡@


CH091581
TIMING TOOL KIT (BMW MINI)


¡· THIS TOOL KIT CAN USE FOR BMW MINI 2001~2006,
MINI COOPER S 2002~2006 AND MINI COOPER 2001~2006.
¡· CONTENTS:
1PC - CAMSHAFT SPOROCKET HOLDING TOOL
1SET - FNGINES SUPPORT BRACKET
1PC - TENSIONER ASSEMBLY TOOL



CH091582
ENGINE TIMING LOCKING TOOL SET


¡· A COMPREHENSIVE 16 PIECE SET OF ENGINE TIMING
LOCKING TOOLS FOR CAMSHAFT, CRANKSHAFT AND FLYWHEEL.
¡· APPLICATIONG: CITROEN, FIAT, FORD, OPEL, PEUGEOT,
RENAULT, ROVER, VAUXHALL, VOLKSWAGEN.
¡@
          More New Products   Page 1  |  Page 2  |  Page 3 Page 4  |  Page 5  |  Page 6

¡@

Chih TAI Y&S CO.,LTD

   No.20, Lane 70, Sec.5, Yang-Hai Rd., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.BOX: 107 Lukang         E-mail: chihtai@ms16.hinet.net

Copyright © 2007 Chih-Tai Y&S Company Ltd.

¡@

¡@