Air Tools

  Chih Tai Y&S Co., Ltd.

   No.20, Lane 70, Sec.5, Yang-Hai Rd., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.Box: 107 Lukang         E-mail: chihtai@ms16.hinet.net  

   Search our site of over 10,000 items   


Contact Us

Home

Air Tools
Auto Tools
Socket Sets
Wrench
Fluid/Oil extractor
Motor Cycle Tools
Pliers
Torque Wrench
Torque Screwdriver
Cordless Tools
Ratchet Handle

New Products

¡@

¡@

   Engine Series  Under Car and Brake Repair  Panel Repair Tools and Body  Timing Tool and Alignment Tool
   Battery and Electrical  Hydraulic Series  Special Tool and Accessories Screwdriver and Plier  General Tools
   Air Conditioning  Lighting  Tire Gauge  European Car Repair Series American Car Repair Series

Engine Series

UNIVERSAL RADIATOR PRESSURE TESTER KIT

ITEM NO.: CH120802

UNIVERSAL RADIATOR PRESSURE TESTER KIT

¡@

ITEM NO.:CH120802-NV
RADIATOR PRESSURE TESTER & VACUUM TYPE COOLING SYSTEM KIT (25 PCS)

CLICK FOR FULL SPECIFICATIONS


ITEM NO.: CH120802-A

UNIVERSAL RADIATOR PRESSURE TESTER KITS OPERATION INSTRUCTION

ITEM NO.: CH120802-B

UNIVERSAL RADIATOR PRESSURE TESTER KITS OPERATION INSTRUCTION


ITEM NO.: CH120802-N

UNIVERSAL RADIATOR PRESSURE TESTER KIT(NYLON 66)

¡@

FLEXIBLE CABLE HOSE CLAMP REMOVING PLIERS

Item No.: CH152008

FLEXIBLE CABLE HOSE CLAMP REMOVING PLIERS

¡@


UNIVERSAL VALVE REPAIR KIT

ITEM NO.: CH152005

UNIVERSAL VALVE REPAIR KIT

¡@

VALVE SPRING COMPRESSOR

ITEM NO.: CH091515

VALVE SPRING COMPRESSOR

¡@


UNIVERSAL PULLEY HOLDER & FAN CLUTCH SET

ITEM NO.: CH091507A

UNIVERSAL PULLEY HOLDER & FAN CLUTCH SET

¡@

CRANK PULLEY HOLD PLATE

ITEM NO.: CH091530

CRANK PULLEY HOLD PLATE
¡@


10" OIL FILTER PLIERS

ITEM NO.: CH111302-10

10" OIL FILTER PLIERS

¡@

HEAVY DUTY COIL SPRING COMPRESSOR WITH BEARING

ITEM NO.: CH050303

HEAVY DUTY COIL SPRING COMPRESSOR WITH BEARING

¡@


ITEM NO.: CH152012-A

METRIC STUD REMOVER AND SETTER KIT

ITEM NO.: CH080707

30PCS CUP TYPE OIL FILTER WRENCH KIT

¡@


ITEM NO.: CH080708

COMBINATION ELECTRONIC STETHOSCOPE KIT

¡@

ITEM NO.: CH152011

PETROL ENGINE TWIN CAM LOCKING/SETTING TOOL

AND FLYWHEEL HOLDING TOOL KIT


ITEM NO.: CH152010

ENGINE COOLING SYSTEM LEAKAGE TESTER

¡@

¡@



ITEM NO.: CH130812     
6PCS ALTERNATOR
FREEWHEEL PULLEY REMOVAL TOOL

SPECIFICATION:

* Easy removal of free wheel pulley from alternator either on or off the vehicle.
* Allows alternator shaft to be held while the pulley retainer is removed.
* Applications: Audi, BMW, Citroen, Ford, Mercedes, Opel, Peugeot, Porsche, Renault, Vauxhall, Skoda.

SIZE:

Socket Insert
1pc-TRX T50, 64mmL, 12mmHex driver
1pc-XZN M10, 64mmL, 12mmHex driver
1pc-XZN M10, 110mmL, 1/2"socket driver
1pc-XZN M10, 140mmL, 1/2"socket driver

¡@

Locking Insert
1pc-33t x dia.19.5mm, 21mmHex driver

1pc-28mm x dia.Hex, 21mmHex driver


¡@

¡@


CH0915106

EXHAUST PIPE HANGER STRECTCHER
"¡· STECTCHER REMOVES EXHAUST SYSTEMS FOR RUBBER-STYLE HANGERS EASILY.

¡· THE SLIP-RESISTANT HANDLES AND SELF-LOCKING FORCE PIN ALLOW FOR QUICK REMOVAL OF RUBBER EXHAUST HANGERS.

¡· A SLIM PROFILE AND 25¢X OFFSET ALLOW FOR EASY ACCESS TO CONFINED AREAS."
¡@


¡@


¡@

CH0915107

DIESEL INJECTOR SOCKET
¡·21MM 1/5"D. FOR FORD DURA-TORQ ENGINES
OEM 303-677.

¡@


¡@

CH0915108

"SPARK PLUG CABLE PULLER(FOR VW AUDI)"
"¡· REMOVING AND INSTALLING SPARK PLUG CONNECTORS.
¡· SPARK PLUG SOCKET REMOVER FOR NEW BEETLE AND CARS WITH 2.0 ENGINE AZJ. LOCKING, VW GOLF IV & V WITH 1.6 EINGINE, VW AUDI, BORA, MERCEDES, SMART¡KETC.
¡· LENGTH¡G264MM.
¡· MADE OF STAINLESS STEEL."


CH0915109

SPARK PLUG CABLE REMOVER TOOL
"¡· FOR METAL SPARK-PLUG CAPS. TO RELEASE AND DETACH PLUG-LEADS FROM INACCESSIBLE LOCATIONS, SUCH AS VW-AUDI, MERCEDES, SMART ETC.
¡· PRODUCT LENGTH: 350MM"


CH0915109-A

SPARK PLUG CABLE REMOVER TOOL
"¡· FOR METAL SPARK-PLUG CAPS. TO RELEASE AND DETACH PLUG-LEADS FROM INACCESSIBLE LOCATIONS, SUCH AS VW-AUDI, MERCEDES, SMART ETC.
¡· PRODUCT LENGTH: 225MM"


¡@

¡@

¡@

CH0915111-B

6PCS FILTER SOCKET KIT
"¡·FILTER CAP WRENCH KIT WITH 6 DIFFERENT SIZES FOR USE WITH MOST POPULAR VEHICLES.
¡·INCLUDES:
A.24MM FOR USE ON CADILLAC 36
B.27MM FOR USE ON MERCEDES A CLASS,VW,
2.8L, 3.2L & 3.6L V6 USED IN CADILLAC CTS,
STS,SRX,BUICK RENDEZVOUS ULTRA,BUICK
LACROSSE CXS,SATURN L3000,SAAB 9-5 &
MERCEDSE 1.8L
C.29MM(1-1/8"")FOR DODGE CUMMINS FUEL
FILTER HOUSING
D.32MM FOR USE ON 2.2 SATURN ECOTEC,SAAB
AND GM
E.35/36MM FOR FORD 6.0L DIESEL FUEL AND OIL
FITER HOUSINGS,MINI COOPER AND SOME
BMW OIL FILTER HOUSINGS,AND MACK TRUCK
OIL FILTER HOUSING.
F.38MM FOR USE ON VAUXHALL/VECTRA 2 LITER
DIESEL ENGINE"

¡@


¡@

CH0915111-C

FILTER SOCKET KIT
"¡·CAN BE USED FOR A VARIETY OF FILTER HOUSING APPLICATIONS.
¡·ALL SOCKETS ARE 3/8"" DRIVE.
¡·INCLUDES:
A.29MM (1-1/8"") FOR DODGE CUMMINS FUEL FILTER HOUSING
B.32MM (1-1/4"") FOR GM ECOTEC, 2.0L, 2.2L AND 2.4L FOUR CYLINDER OIL FILTER HOUSING; SOME SATURN & SAAB.
C.35/36MM FOR FORD 6.0L DIESEL FUEL AND OIL FITER HOUSINGS, MINI COOPER AND SOME BMW OIL FILTER HOUSINGS, AND MACK TRUCK OIL FILTER HOUSING."

¡@


¡@


CH0915111-D

7PCS FILTER SOCKET MASTER KIT
"¡·FILTER CAP WRENCH KIT WITH 6 DIFFERENT SIZES FOR USE WITH MOST POPULAR VEHICLES.
¡·INCLUDES:
A.24MM FOR USE ON CADILLAC 36
B.27MM FOR USE ON MERCEDES A CLASS,VW,
2.8L, 3.2L & 3.6L V6 USED IN CADILLAC CTS,
STS,SRX,BUICK RENDEZVOUS ULTRA,BUICK
LACROSSE CXS,SATURN L3000,SAAB 9-5 &
MERCEDSE 1.8L
C.29MM(1-1/8"")FOR DODGE CUMMINS FUEL
FILTER HOUSING
D.32MM FOR USE ON 2.2 SATURN ECOTEC,SAAB
AND GM
E.35/36MM FOR FORD 6.0L DIESEL FUEL AND OIL
FITER HOUSINGS,MINI COOPER AND SOME
BMW OIL FILTER HOUSINGS,AND MACK TRUCK
OIL FILTER HOUSING.
F.38MM FOR USE ON VAUXHALL/VECTRA 2 LITER
DIESEL ENGINE
G.30MM FOR KOREAN CAR USE"
¡@

¡@


¡@

CH0915113

DIESEL INJECTORS SEAT CUTER AND FACE CLEANER
"¡· AFTER REMOVING USED INJECTOR FROM CYLINDER HEAD IS IMPORTANT TO CLEAN SEAT OF INJECTOR, BY THIS TOOL YOU CAN CLEAN SEAT AS WELL AS INJECTOR SEAT.
¡· ALL PROCESS IS MADE MANUALLY BY TURNING BY HAND WITH APPLY LITTLE BIT OF PRESSURE."

¡@


CH0915115

WATER PUMP HOLDER (FOR GM ECOTEC)
¡· HOLDS THE TIMING CHAIN AND GEAR IN PLACE WHILE REMOVING OR INSTALLING WATER PUMP ON ECOTEC ENGINES.

¡@



CH0915116

HOSE PINCH-OFF PLIERS
"¡·PLIERS SQUEEZE HOSES SHUT AND JAWS SWIVEL FOR PARALLEL CLAMPING.
¡·PLIERS INCLUDE AUTOMATIC LOCKING RATCHET.
¡·TOOL CAN BE USED TO PINCH OFF SOME EMISSION SYSTEM HOSES.
¡·DO NOT USE ON WIRE-REINFORCED HOSE."

¡@


CH0915119

DIESEL INJECTOR NOZZLE SOCKET
"¡·THE SET INCLUDE 4PCS DIESEL INJECTOR NOZZLE SOCKET.
¡·1/2DR SOCKET CAN USE FOR SIEMENS & BOSCH INJECTORS.
¡·SUITABLE FOR PEUGEOT AND CITROEN WITH 2.0 ENGINES (110/135HP)HDI ENGINE.
¡·SIZE: 25, 27, 29 AND 30MM."



CH0915120

FUEL LINE PLIERS
"¡· FOR VOLKSWAGEN AUDI GROUP.
¡· FOR USE ON THREE ENDED HOSE CLIPS WHICH ARE FITTED TO: AUDI/SEAT/SKODA/VOLKSWAGEN FUEL LINES CLAMPS.
¡· CLAMPING RANGE 28-18MM."

¡@


¡@


CH0915121

RATCHETING SERPENTINE BELT WRENCH SET
"¡· SERVICE APPROXIMATELY 90% OF ALL VEHICLES EQUIPPED WITH SPRING-LOADED SERPENTINE BELT TENSIONERS.
¡· RATCHETING ACTION ALLOWS QUICK AN EASY POSITIONING OF WRENCH DRIVING END FOR TENSIONER ACCESS FROM ANY ANGLE.
¡· FOR USE WHEN SERVICING SERPENTINE DRIVE BELTS OR ANY BELT-DRIVEN ACCESSORIES.
¡· SPECIFICALLY DESIGNED TO FIT INTO TIGHT AREAS."

¡@


¡@


CH091538
4" OFFSET HARMONIC DAMPER PULLEY HOLDING TOOL(HONDA & ACURA)

¡· THIS UNIQUE TOOL HAS BEEN DEVELOPED TO AID IN THE REMOVAL AND INSTALLATION OF THE CRANK BOLT ON MOST HONDA AND ACURA ENGINES.
¡·IT HAS BEEN RE-ENGINEERED TO WORK ON 2004 AND LATER NEW STYLE SUV'S WITH A 50MM DAMPER PULLEY AS WELL AS ALL PREVIOUS MODELS SERVICED.
¡· IN OPERATION WITH THE USE OF A 1/2" BREAKER BAR OR RATCHET THIS TOOL HOLDS THE HARMONIC DAMPER PULLEY FROM ROTATING WHEN REMOVING AND SETTING THE FINAL TORQUE SPECIFICATION ON THE PULLEY BOLT.
¡·THERE IS A HOLE IN THE CENTER OF THE TOOL TO ALLOW THE USE OF A SOCKET AND EXTENSION TO BREAK LOOSE OR TIGHTEN THE PULLEY BOLT.

APPLICATION:
FOR HONDA ACCORD 2.2L 4 CYLINDER 90-97, 2.7L V-6 96-97, 2.3L 4 CYLINDER 98-02, 2.4L 4 CYLINDER 03 & LATER, 3.0L V-6 98 & LATER
CIVIC 1.6L 4 CYLINDER 92-00, 1.7L 4 CYLINDER 01 & LATER, 2.0L 4 CYLINDER 03 & LATER
CRV 2.0L 4 CYLINDER 97-01, 2.4L 4 CYLINDER 02 & LATER
DEL SOL 1.6L 4 CYLINDER 93-97
INSIGHT 1.0L 3 CYLINDER 00 & LATER
ODYSEY 2.2L 4 CYLINDER 95-97, 2.3L 4 CYLINDER 98, 3.5L V-6 99 & LATER
PILOT 3.5L V-6 03 & LATER
PRELUDE 2.2L 4 CYLINDER 92-01, 2.3L 4 CYLINDER 92-96
S2000 2.0L 4 CYLINDER 00-03, 2.2L 4 CYLINDER 04 & LATER
ELEMENT 2.4L 4 CYLINDER 03 & LATER
*RIDGELINE 3.5L V-6 06 & LATER
FOR ACURA
CL 2.2L 4 CYLINDER 97, 3.0L V-6 97-99, 2.3L 4 CYLINDER 98-99, 3.2L V-6 00-03 INTEGRA 1.6L 4 CYLINDER 90-92, 1.7L 4 CYINDER 92-93, 1.8L 4 CYLINDER 93-01
LEGEND 3.2L V-6 91-95
MDX 3.5L V-6 01 & LATER
RL 3.5L V-6 96 & LATER
RSX 2.0L 4 CYLINDER 02 & LATER
TL 3.2L V-6 95 & LATER
*TSX 2.4L 4 CYLINDER 04 & LATER
*RDX 2.3L 4 CYL TURBO 06 & LATER

¡@




¡@

CH091539 WATER PUMP HOLDING TOOL FOR GM

¡·SIMPLY REMOVE ACCESS PLATE FROM FRONT COVER AND INSTALL THE TOOL TO HOLDING TIMING CHAIN IN PLACE
¡·USE FOR 2002-2008 GM 2.2L & 2.4L ECOTECH ENGINE IN CHEVROLET OLDSMOBILE, PONTIAC AND SATURN PLATFORMS
¡·APPLICATION GM ECO TECH
2.2 ENGINE CODE F

2002-2005 CHEV CAVALIER
2005-2008 CHEV COBALT
2003-2008 CHEV MALIBU
2002-2004 OLDS ALERO
2002-2005 PONTIAC SUNFIRE
2007-2008 PONTIAC G5
2002-2005 PONTIAC GRAND AM
2002-2006 SATURN VUE
2003-2007 SATURN LON
2000-2005 SATURN L SERIES
2.4 ENGINE CODE B
2005-2008 CHEV COBALT
2005-2007 CHEV HHR
2004-2008 CHEV MALIBU
2006-2008 PONTIAC G6
2006-2007 PONTIAC PURSUIT
2006-2008 PONTIAC SOLSTICE
2007-2008 SATURN AURA
2006-2007 SATURN LON
2007-2008 SATURN SKY

¡@




¡@

CH091540
WINDSCREEN WIPER ARM REMOVAL TOOL


¡·THE SPECIAL DESIGN OFFERS EASY ACCESS IN CONFINED SPACES AND ELIMINATES THE RISK OF DAMAGE TO THE WIPER ARMS.
¡·A SIMPLE, EFFECTIVE TOOL ALLOWING EASY REMOVAL THE STUBBORN WIPER ARMS.
¡·SIZE: 16MM*46MM




¡@

CH091540-A
WINDSCREEN WIPER ARM REMOVAL TOOL


¡·THE SPECIAL DESIGN OFFERS EASY ACCESS IN CONFINED SPACES AND ELIMINATES THE RISK OF DAMAGE TO THE WIPER ARMS.
¡·A SIMPLE, EFFECTIVE TOOL ALLOWING EASY REMOVAL THE STUBBORN WIPER ARMS.
¡·SIZE: 26MM*42MM




¡@

CH091544
CADILLAC/AURORA WATER PUMP R&R SOCKET


¡·THIS UNIQUE TOOL HAS BEEN DEVELOPED TO REMOVE AND INSTALL THE WATER PUMP ON CADILLAC NORTHSTAR 4.6 LITER V-8 ENGINES FROM 1993 AND LATER ALSO OLDSMOBILE AURORA 4.0 LITER V-8 ENGINES 1995 AND LATER.
¡·MANY OF THE SOCKETS PRESENTLY AVAILABLE ON THE MARKET ARE FRAGILE IN NATURE DUE TO THE CONFINED AREA AROUND THE WATER PUMP IMPELLER AND CAN NOT USE FOR IMPACT WRENCH.





¡@

CH091545
ADJUSTABLE STYLE HOSE REMOVER


¡· THIS TOOL SPECIFICALLY DESIGNED FOR REMOVING HOSES, QUICK AND EASILY LOOSENS AND REMOVES HOSES WITH A SIMPLE FORWARD AND BACKWARD MOTION.
¡·WITHOUT NEEDING SCREWDRIVERS AND MULTI-GRIP PLIERS, NO MORE TORN HOSES, NO MORE DAMAGE TO PLASTIC COUPLINGS.
¡· TOOL CONSISTING OF A BODY AND MOVING JAW THAT ADJUSTS TO FIT HOSE DIAMETER BETWEEN Ø48 TO Ø115MM





¡@

CH091545-A
ADJUSTABLE STYLE HOSE REMOVER


¡·THIS TOOL SPECIFICALLY DESIGNED FOR REMOVING HOSES, QUICK AND EASILY LOOSENS AND REMOVES HOSES WITH A SIMPLE FORWARD AND BACKWARD MOTION.
¡· WITHOUT NEEDING SCREWDRIVERS AND MULTI-GRIP PLIERS, NO MORE TORN HOSES, NO MORE DAMAGE TO PLASTIC COUPLINGS.
¡·TOOL CONSISTING OF A BODY AND MOVING JAW THAT ADJUSTS TO FIT HOSE DIAMETER BETWEEN Ø24 TO Ø53MM.




¡@

CH091546
WATER SENSOR SOCKET


¡·GMC 6.6L DURAMAX DIESEL ENGINE APPLICATION INCLUDING:
2001 TO PRESENT CHEVY/GMC PICK UPS
2003 TO PRESENT CHEVY/GMC MEDIUM DUTY TRUCKS
¡·REMOVE OR INSTALL WATER SENSOR ON FUEL FILTER FOR GM 6.6L DURAMAX DIESEL ENGINES.




CH091549
DIESEL INJECTION PUMP PULLER (BMW)


¡· THIS TOOL IS SPECIFICALLY DESIGNED FOR HOLDING THE SPROCKET/CHAIN IN PLACE WHEN DISASSEMBLING THE VP44 INJECTION PUMP AND HIGH PRESSURE PUMP.
¡·COMMON RAIL FITTED TO BMW ENGINES:
318D/COMPACT(E46)
320D/TD COMPACT(46)
330D(E46)
525D(E39)
525D(E60/E61)
530D(E39)
530D(E60/E61)
535D(E60/E61)
730D(E38)
X5 3.0D(E53)
¡@


CH091554
DIESEL INJECTION PUMP PULLER(FOR 2.5TDS ENGINES)


¡·FOR BMW/LAND ROVER/VAUXHALL/OPEL.


CH091557
VACUUM HOSE IDENTIFIERS


¡·THE IDENTIFIERS ARE COMMONLY USED WHEN
TUNING THE ENGINE OR WORKING ON THE CARBURETOR.
¡·IDENTIFIERS CAN ALSO BE USED TO PLUG FUEL LINES
WHILE CHANGING.
¡·CONTENTS: 12PC-1/8" 18PC-3/16-1/4" 12PC-5/16"-3/8"
6PC-6"1/2"


CH091565
SETTING/LOCKING TOOL KIT
(FOR VAG V6 TDI PETROL ENGINE)


¡·A DEDICATED SET OF SETTING/ LOCKING, SUPPORT AND
TENSIONER ADJUSTING TOOLS FOR VW 2.5 V6 DIESEL ENGINES.


CH091575
VW, AUDI BELT PULLEY HOLDER


¡·SPECIAL DESIGN TO HOLD THE BELT PULLEY ON VW, AUDI.
¡·APPLICABLE¡GVW¡G LUPO, POLO/CLASSIC, GOLF,
BORA & CADDY.AUDI¡GA2


CH091576
VW BELT PULLEY HOLDER


¡·SPECIAL DESIGN TO HOLD THE BELT PULLEY ON VW.
¡·APPLICABLE¡GVW¡G LUPO, POLO/CLASSIC, BEETLE,
GOLF, BORA & CADDY.
SEAT¡G IBIZA/CORDOBA


CH091578-12
BRACKET FOR CHAIN ADJUSTER


¡· USED TO RETAIN CAMSHAFT CHAIN ADJUSTER
¡· APPLICABLE: VW & AUDI 4, 6 (2.7L & 2.8L) &
8 CYLINDER ENGINES CONTAINING 5 VALVES PER CYLINDER
¡@


CH091599
CAMSHAFT SETTING PLATE

¡· USED TO HOLD BOTH CAMSHAFTS AT TDC POSITION WHEN REPLACING TIMING BELT.
¡·APPLICABLE: AUDI: A4.A6.A8.S4.ALLROAD(95-04). VW: PASSAT(96-04)WITH CODES: ACK, AGA, AGB, AJG, ALF, ALG, ALW, AML, AMM, AMX, APR, APS, APZ, AQD, ARE, ARJ, ASM, BDV, BES.

PACKING: 10/23/23.5/1.4', color box


CH0915102
TENSIONER ROLLER ADJUSTING TOOL

¡· VW/AUDI 1.8T TENSIONER HOLDER KIT USED FOR HOLDING TIMING BELT TENSIONER AND THE ACCESSORY BELT TENSIONER.

PACKING: 12/144/10/11/3.2', sliding card


CH0915104
ADJUSTING TENSIONER BELT SET

¡·APPLICATION: ALL VAG GROUP.

PACKING: 6/24/17.5/18.5/2', sliding card


CH0915104-A
4PCS ADJUSTING TENSIONER BELT SET

¡·APPLICATION: ALL VAG GROUP.

PACKING:10/12.8/13.8/1.2', blow case+color


CH0915105
TENSIONER ROLLER ADJUSTING TOOL

¡· APPLICATION:
AUDI: A4(01-07), A6(01-05), CABRIOLET(03-07)
SEAT: IBIZA(04-07)
SKODA: SUPERB(02-07)
VW: POLO(06-07), EOS(06-07), PASSAT(01-05)

PACKING: 12/48/18.3/19.3/2.2', sliding card


CH091589

4PC. SENSOR & SENDING UNIT SOCKET EXTENSION SET
¡@
SET INCLUDES:

¡·22MM SPECIAL TUBE SOCKET
¡·OXYGEN SENSOR THREAD CHASER
¡·OXYGEN SENSOR WRENCHES OFFSET (2-1/8") & SUPER DUTY 12 & 6 POINT SOCKET
¡·OXYGEN SENSOR SOCKET

¡@


CH091590

6PCS DIESEL INJECTOR SOCKET KIT.

¡· THIS SOCKET SET CAN USE FOR ALFA ROMEO, AUDI, CHRYSLER, FORD, LAND ROVER, MERCEDES-BENZ, PEUGEOT, ROVER, SEAT, VAUXHALL AND VOLVO.

¡@


CH091593
8PCS SENSOR SOCKET SET

¡@
¡·22MM SPECIAL TUBE SOCKET.
¡·OXYGEN SENSOR THREAD CHASER.
¡·OXYGEN SENSOR WRENCHES OFFSET (2-1/8") & SUPER DUTY 12 & 6 POINT SOCKET.
¡·OXYGEN SENSOR SOCKET.
¡·1/2" DRIVE X 29 X 90 MM OXYGEN SENSOR SOCKET.
¡·3/8" DRIVE X 7/8" X 90MM OXYGEN SENSOR SOCKET.
¡·3/8" DRIVE X 7/8" X 50MM HEATED OXYGEN SENSOR SOCKET.
¡·3/8" X 7/8" X 30MM OFFSET OXYGEN SENSOR WRENCH.


CH091594
11PC. SENSOR & SENDING UNIT SOCKET MASTER SET
¡@
¡·22MM SPECIAL TUBE SOCKET.
¡·OXYGEN SENSOR THREAD CHASER.
¡·OXYGEN SENSOR WRENCHES OFFSET (2-1/8") & SUPER DUTY 12 & 6 POINT SOCKET.
¡·OXYGEN SENSOR SOCKET.
¡·1/2" DRIVE X 29 X 90 MM OXYGEN SENSOR SOCKET.
¡·3/8" DRIVE X 7/8" X 90MM OXYGEN SENSOR SOCKET.
¡·1/2" DRIVE X 27 X 85MM INJECTOR SOCKET.
¡·3/8" DRIVE X 7/8" X 80MM VACUUM SWITCH SOCKET.
¡·3/8" DRIVE X 1-1/6" X74MM OIL SENDER UNIT SOCKET.
¡·3/8" DRIVE X 7/8" X 50MM HEATED OXYGEN SENSOR SOCKET.
¡·3/8" X 7/8" X 30MM OFFSET OXYGEN SENSOR WRENCH.



 CH091595
 COPPER WASHER REMOVAL TOOL FOR DIESEL INJECTOR
¡@
   ¡·SIZE:INNER HOLE 7
       LENGTH:230MM

   ¡·COLLET TYPE EASY TO HOLDING THE COPPER
       WASHER.


CH121411-AHM

4pc Diesel Injector Removal Set - Delphi & Bosch

Specifically designed for removing Delphi/Bosch diesel injectors using a Slide Hammer(492mm) with 5/8" UNF thread.
Adaptors can also be used with an air tool to loosen the injectors by vibration.
Set of 3 adaptors plus a special tool for removing the internal part of Bosch injectors.


CH121414
Reaction Wrench for Crankshaft Pulley
(German Utility Model)

For VW-Audi 4 and 5 cylinder engines with and without harmonic damper.To provide a reaction onto the crankshaft front pulley so that the central pulley bolt may be lossened or tightened.
Required for timing belt changes, oil-seal replacement and during engine repairs.
Advantage: By using the 2 extension handles, the loosening and tightening
of the central crankshaft pulley bolt can be undertaken by a single mechanic.


CH121416-A

Universal Windscreen Wiper Arm Puller Set for cars and trucks

Contents:
* 8 grippers
* 1 drive
* 1 spindle-cap
* 1 hollow-cap
* 1 spindle-extension
* 1 puller
* 2 special-legs
* 1 slide hammer
Cars: Audi, Alfa-Romeo, BMW, Chrysler-Jeep, Citroen, Chevrolet-Daewoo, Daihatsu, Fiat, Ford, Honda, Hyundai, Jaguar, KIA, Land Rover, Mazda, MG-Rover, MB, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Suzuki, Toyota, Volvo, VW...
Trucks: MAN, MB, Scania...
Patent¡GEurope, U.S.A, Taiwan.


CH121417-19C

Master Terminal Tool Kit

* Updated kit for most modern vehicles
* Includes newest terminal tools for Audi and Volkswagon
* Specialty tools included for coolant sensors, wiring
  harnesses and terminal blocks
* Eliminates potential damage to wires and terminal blocks
* Knurled finish handles for superior grip
* Application chart included


CH121420-PT6

Master Deluxe Line Disconnect Tool Set
* For separating Quick Disconnect fittings on fuel and cooler lines.
* Unique offset design allows for access in confined or obstructed areas.
* Easy, one-handed operation.
* Material: Plastic.
AC-20030PT-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.
AC-20030PT-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20030PT-6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.


CH121420-PT8

Master Deluxe Line Disconnect Tool Set
* For separating Quick Disconnect fittings on fuel and cooler lines.
* Unique offset design allows for access in confined or obstructed areas.
* Easy, one-handed operation.
* Material: Plastic.
AC-20030PT-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.
AC-20030PT-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20030PT-6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.
Fuel Line Disconnect Tool- For 3/8" & 5/16" applications.
Fuel Line Disconnect Tool- For 3/8" & 1/2" applications.


CH121420-PT10

Master Deluxe Line Disconnect Tool Set
* For separating Quick Disconnect fittings on fuel and cooler lines.
* Unique offset design allows for access in confined or obstructed areas.
* Easy, one-handed operation.
* Material: Plastic.
AC-20030PT-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.
AC-20030PT-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20030PT-4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-200300PT-5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20030PT-6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20030PT-7(Green) Size: 3/8", Deluxe GM Cooler Line Disconnect Tool, for transmission cooler lines.
AC-20030PT-8(Pink) Size: 3/8", Deluxe Cooler Line Disconnect Tool, for cooler lines on most Ford vehicles and on 2003 to current Cadillac CTS.
AC-20030PT-9 Size:1/2", Oil Cooler Line Remover.
AC-20030PT-10 Size:1/2", Oil Cooler Line Remover.


CH121421-A

Master Deluxe Line Disconnect Tool Set
* For separating Quick Disconnect fittings on fuel and cooler lines.
* Unique offset design allows for access in confined or obstructed areas.
* Easy, one-handed operation.
* Anodized aluminum construction.
AC-20020A-1(Dark Grey) Size: 1/2", Deluxe Line Disconnect Tool, for most 1/2" lines.
AC-20020A-2(Blue) Size: 5/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20020A-3(Black) Size: 3/4", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20020A-4(Silver) Size: 7/8", Deluxe Line Disconnect Tool, for heater, A/C lines and more.
AC-20020A-5(Red) Size: 5/16", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20020A-6(Gold) Size: 3/8", Deluxe Line Disconnect Tool, for fuel & cooler lines.
AC-20020A-7(Green) Size: 3/8", Deluxe GM Cooler Line Disconnect Tool, for transmission cooler lines.
AC-20020A-8(Pink) Size: 3/8", Deluxe Cooler Line Disconnect Tool, for cooler lines on most Ford vehicles and on 2003 to current Cadillac CTS.


CH121408

22PC. Fuel & Air Conditioning Line Disconnect Set
* AC-20012 6pc. Fuel & Air Conditioning Line Disconnect Set- 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
* AC-24001 Ford A/C spring lock coupling tool,red(3/8")
* AC-24002 Ford A/C spring lock coupling tool,blue(1/2")
* AC-24003 Ford A/C spring lock coupling tool,black(5/8")
* AC-24004 Ford A/C spring lock coupling tool,beige(3/4")
* AT-515A Fuel Line Disconnect Tool
* CJ-400A Ford Oil Cooler Line Disconnect Tool
* CJ-570 Ford Fuel Line Coupling Tool
* CJ-400 Ford/GM Quick Disconnected Tool
* CJ-500 7PC A/C, Fuel Line Disconnect Set
* AC-24031 Rubber Band


CH121422-B

Camshaft Clamp Tool
Touareg 2003, Phaeton 2003, Transporter 2004, 5 and 10-cyl. Diesel engine.


CH121424

Injector Nozzle Puller
Mercedes CDI
Suitable for Mercedes CDI engine OM 668 e.g. A-Class
The injector nozzle pujller makes it possible to remove
even nozzles that are a very tight fit in the cylinder head, without the
cylinder head having to be removed from the engine.


CH121409-AB

Valve Keeper Remover And Installer Kit
For use on all motors with overhead valves-autos, motorcycles, marine, and aircraft. Will not bend or loosen valve springs. Works on gas or diesel engines; removes and replaces VW Rabbit keepers. Magnet retains keepers. Takes the place of C-clamp style removers.
* Fits most Overhead Valve applications
* Smaller size fits new Chrysler New World Engine and some Toyota four cylinders
* Comes in a handy plastic case
* Can work on the car or bench
* Magnet in tool body captures keepers for quick removal and valve disassembly
* Quickly removes and installs valve keepers on most overhead valve engines. Works on valve stems from 4.5 to 7.5 mm and 5/16" to 3/8". Magnet in tool body captures keepers for quick removal and valve disassembly


CH121425

Universal Pulley Puller Set
* For pulling and installing of belt pulleys at power steering pumps, generators, fan wheels, etc.
* 2 cross beams: 140 mm and 230 mm long.
* 2 pairs of straight pullers: length 60 mm and 110 mm.
* 1 pair of specifically formed pullers: length 60 mm.
* All pullers and cross beams can be combined.


CH121426-A

Damper Pulley Puller Holder Wrench Set
13, 15, 16, 17, 19 mm

Click to Enlarge


CH121427-A

Injector Nozzle Puller With Slide Hammer
Injector nozzles that do not fit very tightly can be pulled out without needing to take them apart or remove the cylinder block.The puller is additionally supported by the steel ball on the valve cover , which prevents the puller from tipping during the removal process.
Applicable for Mercedes-Benz CDI engines OM 611/612/613


¡@

CH121427-B

Injector Extractor
For removing seized or stuck Common Rail injectors without having to disassemble the cylinder head.
Applicable for MERCEDES-BENZ CDI engines 611, 612, 613, etc.
• Especially suited to the limited spaces due to the cylinder head cover
Contents:
1 Impact Extractor
1 Injector Claw
1 External Adapter-With internal threads. In conjunction with Impact Extractor.


CH121427-C

Injector Puller Set
Mercedes CDi
This six piece puller set has been especially designed for removing stubbon injectors on Mercedes Benz vehicles fitted with CDi engines.
Packed in a blow moulded case.


CH121433-B

Oil Pan Repair Master Set

*Feature: Solid and fast solution for the repair of defective oil drain screw thread without the expensive replacement of the sump.
*Application: The damaged thread is simply to tap away to the next size expands. Oil drain screw in part with Allen drive for oil pans with recessed drain opening suitable.
*Universal applications e.g. for: Audi, BMW, Citroen, Daimler-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Toyota, Volvo, VW etc.
*Scope of supply: complete with 1 / 3 foam insert in the plastic case. Replacement oil drain screw and aluminum seals are available.
*Consisting of:
1¢wSpecial Taps M13x1.5
1¢wSpecial Taps M15x1.5
1¢wSpecial Taps M17x1.5
1¢wSpecial Taps M20x1.5
5¢wOil drain plug gasket with aluminum M13x1.5 external drive 6-kant SW17
5¢wOil drain plug gasket with aluminum M15x1.5 external drive 6-kant SW19
5¢wOil drain plug gasket with aluminum M17x1.5 inner drive 6-kant SW 8
5¢wOil drain plug gasket with aluminum M20x1.5 inner drive 6-kant SW 10


CH121435-B

Open Ended Ring Wrench Socket Set
Specially designed to loosen and tighten nuts and bolts in
confined spaces - e.g. Fuel Injector connections.
Drive: 1/2" ¡¼
Length: 100 mm

Part No. 12-point Description
CH121435-B12 12 Open Ended Ring Wrench Socket
CH121435-B14 14 Open Ended Ring Wrench Socket
CH121435-B16 16 Open Ended Ring Wrench Socket
CH121435-B17 17 Open Ended Ring Wrench Socket
CH121435-B18 18 Open Ended Ring Wrench Socket
CH121435-B19 19 Open Ended Ring Wrench Socket

CH121436
Diesel Injector Seat Cutter Set

•Identify injector "blow-by" exists (see previous page for possible symptoms).
•Gain access to the injectors and remove them.
•Select required reamer onto pilot post and tighten internal hex screw.
•Place assembled cutter into injector recess.
•Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direcyion only. Use a small amount of light lubricant whilst performing the cut to reduce chattering and help give a flat cut. Do not over cut the seat only remove enough metal to form a good seat.
•Thoroughly clean the seat and remove all swarf.
•Fit injectors as per manufacturers instructions.
Kit contents:
•CH121436-01-15*19mm Flat Reamer for Universal injector.
•CH121436-02-17*17mm Flat Reamer for Delphi/Bosch injectors (BMW/PSA/Renault/Ford).
•CH121436-03-17*19mm Flat Reamer for Bosch injectors (Mercedes CRD).
•CH121436-04-17*21mm Angled Resmer for Fiat/Iveco.
•T handle*1.
•Pilot post*1.
MATERIAL¡GCR-V


CH121438-SET
Internal Spark Plug Rethread Tool

The tool uses the better threads at the base of the spark plug port and greatly reduces the chance of debris from falling into the cylinder.
• Cleans and rethreads sparkplug ports from the inside out.
• Uses the good threads at the base of the port.
• Reduced dirt and metal from being driven into the cylinder head.
• Use light grease on the end to trap filings and keep tool easy to use.
FT-656A - 12 mm Internal Spark Plug Rethread Tool
FT-656B - 14 mm Internal Spark Plug Rethread Tool
FT-656C - 18 mm Spark Plug Rethread Tool
FT-656D - 08 mm Internal Spark Plug Rethread Tool
FT-656E - 10 mm Internal Spark Plug Rethread Tool
260mm Internal (Thread Chaser)
• It's unique design allows for chasing spark plug threads from inside the cylinder head and working outward.
• Uses the good threads at the base of the port.
• Reduced dirt and metal from being driven into the cylinder head.
• Use light grease on the end to trap filings and keep tool easy to use.
• Length of 260mm(10") allows for deep well plugs.
FT-656A - 12 mm*260L
FT-656B - 14 mm*260L


CH121440

Master Freeze Plug Installation Tool Kit
* Complete kit including straight and formed driver, all adapters and coupling nut, plug exclusive pneumatic adapter.
* All parts quality machined and plated.

PART NO. DESCRIPTION
CH121440-1 18" Bent Shaft Freeze Plug Driver
CH121440-2 Coupling Nut
CH121440-3 1-3/4" Adapter
CH121440-4 1-1/2" Adapter
CH121440-5 1-1/4"" Adapter
CH121440-6 1" Adapter
CH121440-7 3/4" Adapter
CH121440-8 8" Straight Freeze Plug Driver




CH121442

Universal Puller Set

* 1 beam 2-arm
* 1 beam 3-arm
* 9 pulling legs
* 1 spindle


CH121443

Micro-Engineering Puller Kit

Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.
Contents:
* 1 x Puller yoke with centre screw and twin arms.
* 2 x Threaded leg extensions.
* 1 x Centre screw thread cap.
* 2 x 5.5mm ball ended threaded puller adapter.
* 2 x 6.0mm ball ended threaded puller adapter.
* 2 x 8.0mm ball ended threaded puller adapter.


CH121444

Light Engineering Puller Kit

Enables removal of bearings where normal pullers are unable to be used by locking into the bearing race itself.
Contents:
* 1 x Puller yoke with centre screw and twin arms.
* 2 x Threaded leg extensions.
* 2 x 9mm ball ended threaded puller adapter.
* 2 x 11mm ball ended threaded puller adapter.
* 2 x 12.5mm ball ended threaded puller adapter.


CH121445

General Engineering Puller Kit

- 6 pairs of tips 16 - 19 - 22 - 25 - 28 - 32 mm,
Spread Ø70 to Ø190 mm.




CH121446

Universal Truck Ball-Joint Extractor

With three interchangeable forcing forks for universal application to eccentric rods and tie rods on nearly all makes of vehicles, e.g., DAF, Iveco, MAN, Mercedes, Skania, Volvo, etc.
Opening C : 25 - 32 - 47 mm


CH121447-B

Universal Puller Set

3-arm
With pulling legs for narrow spaces in different lengths.
Particularly well suited to be hung up on workshop walls.
All required clamping depths available at any time.


CH121447-B13

Universal Puller Set

3-arm
With pulling legs for narrow spaces in different lengths.
Particularly well suited to be hung up on workshop walls.
All required clamping depths available at any time.


CH121447-BS

Universal Puller Set

3-arm
With pulling legs for narrow spaces in different lengths.
Particularly well suited to be hung up on workshop walls.
All required clamping depths available at any time.
¡@


CH121449

Puller Sets

1 Pulling Unit
* Mechanical: 130mm, ↨ 110mm.
1 Pair Extensions
* Extensions: Length 100mm.
1 Separator
* Separators with pressure beam: Opening 12 - 75
   mm.


CH121450-A

Expansion-Type Puller Kit
Contents:
7 Internal Extractors
2 Pullers: FT-805A-L & FT-805A-S
1 Sliding Hammer


CH121450-B

Expansion-Type Puller Kit
Contents:
10 Internal Extractors
1 Pullers: FT-805A-S
1 Sliding Hammer


CH121450-B6

Expansion-Type Puller Kit
Contents:
5 Internal Extractors
1 Sliding Hammer


CH121450-B7

Expansion-Type Puller Kit
Contents:
5 Internal Extractors
1 Pullers: FT-805A-S
1 Sliding Hammer


CH121452-A

Fan Clutch Removing/Installing Set
Removing fan clutches to replace Water pumps or for other engine service doesn't have to be a headache.
* Five wrenches and five holding tools included give you broad coverage of GM, Ford and Chrysler vehicles that use a fan clutch.
* Fit into close quarters where conventional wrenches just won't get the job done. Heat treated to with stand high torque needed to remove some fan clutches.
* Most wrenches feature a 1/2" drive square for attaching a break bar to apply extra torque.
* 2-1/4" (57mm) Fan pulley holding tool
* 2-3/8" (60mm) Fan clutch bolt holding tool
* 2-1/8" (54mm) Fan clutch pulley holding tool
* 3/1/4" (82mm) Fan pulley holding tool
* 3" (76mm) Fan clutch pulley holding tool
* 2-13/16" (72mm) Fan hub wrench
* 1-7/16" (36mm) Fan clutch nut wrench
* 1-7/16" (36mm) Fan clutch wrench
* 1-9/16" (39mm) Fan clutch wrench
* 1-7/8" (47mm) Left hand clutch nut wrench


CH121458-C

Serpentine Belt Tool
Applications:
3/8¡¨Drive 13mm crowfoot wrench GM Quad Four Engine
3/8¡¨Drive 14mm crowfoot wrench Saturn Engine
3/8¡¨Drive 15mm crowfoot wrench Ford Windstar with 3.8L Engine
13mm Socket (on handle)-Late model GM Quad Four Engine
14mm Socket-1.9 Liter Saturn
15mm Socket-Some GM and Chrysler
16mm Socket-Ford 3.8 L & 4.0 L
18mm Socket - GM 3800 Engine
3/8" Square Drive Socket - 3.1 Liter GM
1/2" Square Drive Socket - Late Model GM and Ford
Short Extension - Allows easier access on some Fords


CH121461-C

Rethreader Kit For 14mm Spark Plugs
Includes the following-also available separately:
CH121461-C1 Tap and Reamer
CH121461-C2 Insert - 11mm(7/16") long
CH121461-C3 Insert - 16mm(5/8") long
CH121461-C4 Insert - 19mm(3/4") long


CH121463

GM Power Steering Pump Pulley Installer
Easily installs power steering pump pulley without
damage to pump shaft or pulley. Required tool
for: 1988 thru current GM Quad 4 engines;
1990-current Chevrolet, Lumina APV, Oldsmobile, Silhouette, and Pontiac Trans, Sport mini vans; 3.1L V6 engines on 1991 -current Chevrolet Lumina sedans, Pontiac Grand Prix, Oldsmobile Cutlass Supreme and Buick Regal.


CH121464

Pulley Puller And Installer Set
Remove pressed-on alternator and power steering pulleys on late-model
GM, Ford and Chrysler engines. The threaded end installs late-model GM
alternator and power steering pulleys. Including Quad 4. Reverse the jaws
to pull the alternator internal bearing. The puller fits some AMCs.
*Replacement part: CH121464-01 Puller Body (Letter A)
*Replacement part: CH121464-02 Jaw and Sleeve Assembly (Letter B)
*Replacement part: CH121464-03 Jackscrew (Letter C)
*Replacement part: CH121464-04 Button (Letter D)
*Replacement part: CH121464-05 Bearing and Was her (Letter E and F)
*Replacement part: CH121464-06 Puller Pin for Quad 4 (Letter G)
*Replacement part: CH121464-07 Screw Installer for Quad 4 (Letter H)
*Replacement part: CH121464-08 Puller Pin for GM 3.1 (Letter J)
*Replacement part: CH121464-09 Screw Installer for GM 3.1 (Letter K)
*Replacement part: CH121464-10 Screw Installer for Ford 4.6 (Letter M)
*Replacement part: CH121464-11 Screw Installer for Others (Letter N)


CH121465

Miscellaneous -- Harmonic Balance Installer
Includes eight adapters for use on a wide range
of engines. Adapters sizes are 7/16"-20, 1/2"-20
,9/16"-18, 5/8"-18, 3/4"-16, M12x1.5, M14x1.5
and M16x2.0.


CH121468

Ball Joint-Puller Bell VIBRO-IMPACT
Available sizes: 23mm, 25mm, 30mm, 32mm, 39mm, 47mm, 62mm & 65mm

¡@


CH152080
¡@

Automotive Piston Pin Remover/Installer Set

Designed to handle piston pin assemblies with range of 0.855¡¨ to 1.062¡¨.

Combine with 5 to 10 ton or greater shop press for quick and easy work.

Absolutely unique anvil with interchangeable inserts directs pressing force only to the pin, eliminating any possible damage to the procedure when installing or removing piston pins.

All packed in a blow-molded carrying case.

Contains eight pin guides, six inserts and all other tooling for necessary.¡@


¡@

  Chih Tai Y&S Co., Ltd.

   No.20, Lane 70, Sec.5, Yang-Hai Rd., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.Box: 107 Lukang         E-mail: chihtai@ms16.hinet.net  


Copyright © 2007 Chih-Tai Y&S Company Ltd.

¡@

¡@