Air Tools

  Chih Tai Y&S Co., Ltd.

   No.20, Lane 70, Sec.5, Yang-Hai Rd., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.Box: 107 Lukang         E-mail: chihtai@ms16.hinet.net  

   Search our site of over 10,000 items   


Contact Us


Home

Air Tools
Auto Tools
Socket Sets
Gear Wrench and Wrench
Fluid/Oil extractor
Motor Cycle Tools
Cordless Tools
Ratchet Handle
Straps and Ratchet Tie Down

New Products

¡@

¡@

Engine and Belt Tools Piston and Brake Tools Valve Seal Tool Crank Bearing Install and Puller Tools Oil Tools
Chain Puller and Install Tools Flywheel Puller Tools Pulley Holder Tools Wrench Tool Fork and Shock Tools Motorcycle | Motorbike Tools Kit Clutch Tools Tire and Wheel Tools Other Tools and Accessories Steering Tools

Engine and Belt Tools (Motorcycle Tools)


¡@


CH152057-A
6mm and 8mm Jet Wrench

2 sizes in one, 6mm on one end and 8mm on the other end,
it fits round jets. Another one with a rubber cap fits 6mm hex jets.


FCR carburetors Tool

CH152057-B
FCR carburetors Tool

It is an ideal tool for FCR carburetors.
It provides 4 tools¡G6mm hex for main jets, a 3mm Allen for
removing the float bowl and long-reach straight slot for pilot
jets. The longer one is an essential tool for reaching into recessed
cavities to adjust Keihin FCR carburetors.


¡@

CH1520137

2 Pcs Head Timing Tool 1000M/03

 

* Belt roller timing of two-valve head.

* It provides 2 sizes¡GM5x0.8 and M8X1.25

* It fits most Ducati bikes.

 


¡@


Plug Socket Tool


CH040917
Plug Socket Tool

Sizes available:
*16mm x 65L
*16mm x 72L
*21mm x 67L

*With Magnetic

¡@


Tappet Adjust Tool(3pcs)

CH040941
Tappet Adjust Tool(3pcs)

*Size:8,9mm


Tappet Adjust Tool(4pcs)

CH040941-1
Tappet Adjust Tool(4pcs)

Including:
*Size:8,9,10mm


Valve Spindle Tool

CH040947
Valve Spindle Tool

*M6 x P1.0
*M8 x P1.25


Piston C-Type Install Tool

Piston C-Type Install Tool

CH040946-18, dia.18
CH040946-20, dia.20
CH040946-22, dia.22


Piston Spindle Tool (4pcs)

Piston Spindle Tool (4pcs)
CH040939

Size:dia.13,15,16,19


Piston Spindle Tool (5pcs)

Piston Spindle Tool (5pcs)
CH040939-1


Size:dia.13,15,16,19,22


Valve Cotter Tool


Valve Cotter Tool
CH040940


Valve Cotter Tool

Valve Cotter Tool
CH040940-1


Micrometer Timing for 2 Stroke Engine

CH0807116
¡@

Micrometer Timing for 2 Stroke Engine

 

Description:

Size:M14 x P1.25

Micrometer Timing for 2 Stroke Engine


CH1520126

Alternator Cover Puller 

 

* It is essential tool to remove the left hand side cover on Ducati Engines.

* Puller provides one tool body (made from 6061 aluminum) and comes with 3 bolts (M10x1.25x50L 1 pc¡BM6x1.0x30L 2pc).

* It fits 1990-2009 Ducati Models 600 / 620 / 695 / 696 / 748 / 749 / 750 / 800 / 848 / 851 / 888 / 900 / 906 / 907 / 916 / 996 / 998 / 999 / 1000 / 1078 / 1098 / 1100 / 1198 .

 


Universal Tensioning Gauge for Cambelts

CH0915237

Universal Tensioning Gauge for Cambelts

 

* This tensioning gauge can be used to adjust the tension on movement of the YAMAHA T-Max drive belt.

* Clear incremental marking with knurled knob for precise measurement.

* Dual scale allows reading from top bottom of tool (large and numbers for compatibility.


CH1520135

Timing Plug Wrench 

 

* It fits the straight-slot timing plugs on most motorcycles and ATVs.

* Blade size is 22mm (7/8¡¨) .

¡@


Valve Cotter Compressor Tool

Valve Cotter Compressor Tool
CH040952


Valve Cotter Tappet Piston Spindle Tool

Valve Cotter Tappet Piston Spindle Tool
CH040965


Valve Cotter Compressor Tool


Valve Cotter Compressor Tool
CH040965-1


HEAVY DUTY VALVE SPRING


ITEM NO.: CH080709

HEAVY DUTY VALVE SPRING
COMPRESSOR SET


Motorcycle Coil Spring Compressor with Cover Steel

ITEM NO.: CH051201-B


Motorcycle Coil Spring Compressor with Cover Steel

Range: 100 mm


CH152098

Cylinder Head Holders

* Sturdy stand holds cylinder heads safely and securely while you repair cracks, grind seats, clean carbon or perform guide work.

* There is ample clearance under heads for knurling and reaming valve guides.


CH1520128-01

Ducati Camshaft Alignment Tool <18 tooth sprocket>

 

* It fits the 851, 888, 916 and 996 engines.

* It allows you to keep the camshaft sprockets correctly aligned while installing of new cam belts.

* It also helps you to remove the nut attaching the pulley to the camshaft.

* Install the tool with lobes on the camshaft with the nut to be removed.

* Use a spanner socket to remove the nut.

* Material¡GAluminum 6061

¡@


CH1520128-02

Ducati Cam Belt Lock Tool <18 tooth sprocket>

 

* It fits 748, 916, 996, and Desmoquattro.

* It helps you to hold the loaded cam from rotating while installing the belts on 4 valve Ducati engines.

* It will not fit st4 or s4 engine.

* Slide the tool between the cam belt pulleys and slide the old belt off.

* Material¡GAluminum 6061

¡@


CH1520128-03

Ducati Short Cam Belt Lock Tool <20 tooth sprocket>

 

* It helps you to hold the loaded cam from rotating while installing the belts on 4 valve Ducati 749/999 Testastretta engines.

* Slide the tool between the cam belt pulleys and slide the old belt off.

* Material¡GAluminum 6061


¡@

CH091501-B
Hose Remover Pliers

Description:

* For easy remove of Ф4 ~ Ф10mm fuel & vacuum hose.
* The pliers have two different color of jaw, black & silver color.

  • Black color jaw for tube end

  • Silver color jaw for hose end

* With ¡§DIGS¡¨ on the black jaw , it can use inside small tube & hose.

¡@


¡@

  Chih Tai Y&S Co., Ltd.

   No.20, Lane 70, Sec.5, Yang-Hai Rd., Fu-Hsing Hsiang, Changhua, Taiwan

   Tel:886-4-7764112  7771377  Fax: 886-4-7765463  7771692

   P.O.Box: 107 Lukang         E-mail: chihtai@ms16.hinet.net  


Copyright © 2007 Chih-Tai Y&S Company Ltd.

¡@

¡@