|
¡@
|
Item No.:CH1308281
21pcs Injector Removal Set
Description:
* Suitable for the removal of stubborn Bosch/ Delphi diesel injectors
* Features a flexible joint adaptor allowing the slide hammer to be used in restricted areas.
Universal joint |
M18x1.5 |
Special bit insert hex 10mm x Ø7.6 |
1x special-use Allen SW10 with 7.5mm bore, 1/2 drive, to remove the fixing ring, for example, Bosch injectors at MB CDI and PSA HDI |
Special bit insert hex 10mm x Ø6.6 |
For releasing the internal screw of the CR injectors. |
Pull Spindle: OT M16x1.0 |
For Denso (Toyota 2.2D) |
Pull Spindle: OT M17x1.0 |
For Bosch injectors, e.g., Alfa, BMW, Fiat, MB, PSA, Renault |
Pull Spindle: OT M20x1.0 |
For Denso |
Pull Spindle: OT M25x1.0 |
Siemens injectors, e.g. PSA (DW10) |
Pull Spindle: OT M27x1.0 |
Siemens injectors, e.g. PSA (DW10) |
Pull Spindle: IT M16x1.5 |
Pull Adapter for M16x1.5 thread, such as used in Facom tools. |
Pull Spindle: IT M14x1.5 |
Internal thread for Bosch/ Delphi Injectors, e.g. MB (OM 629/642/646), PSA (DV4/ DW12), VW (CBD), BMW (M47). |
Pull Spindle: IT M25x0.5 |
For Denso |
Pull Spindle: IT M25x0.5 |
For Denso |
Pull Spindle: IT M27x1.0 |
For Siemens, e.g. Citron C5/ Jumpy/ Xsara, Fiat Ducato JTD, Peugeot 206/307/406/ Boxer (2.0/2.2/2.3 HDI) Mercedes-Benz CDI (except A-Class (Sprinter/ Vito) |
Special socket (25mm) |
For Siemens Injectors – 2.0 HDI (DW Series) As found on PSA, Ford, Toyota etc. |
Special socket (27mm) |
For Siemens Piezo Injectors – 2.0 HDI Piezo (DW Series) As found on PSA etc. |
Special socket (29mm) |
For Bosch type injectors – Bosch CDI /HDI engines |
Special socket (30mm) |
For Bosch type injectors – Bosch Renault /Nissan 1.9 dCi |
Injector gripper (12mm) |
For MB CDI-engines, except Sprinter, Vito and A-class |
Injector gripper (13.5mm) |
For Opel Renault F9Q |
Injector gripper (16mm) |
For Fiat Ducato JTD, Citron C5, Xsara, Jumpy and Jumper HDI and Peugeot 206, 307, 406, Boxer HDI (2.0, 2.2, 2.3I) |
Injector gripper (26mm) |
|
|
